Serving Portland, OR & MetroLicensed · Bonded & Insured
Open Now · 24/7/365(971) 399-8934
24 HourPlumber Portland
Open 24 Hours(971) 399-8934
Portland, OR · Gas · Electric · Tankless

24-Hour Water Heater Repair in Portland, OR

Cold shower at 6 a.m. or a tank leaking at midnight? A live dispatcher answers around the clock and sends a licensed plumber to diagnose and repair your gas, electric, or tankless water heater — flat-rate pricing, parts on the truck, and no after-hours surcharge.

Call (971) 399-8934 Request Service
A Human Answers 24/7Never voicemail, any hour
All Fuel TypesGas · electric · tankless
No After-Hours SurchargeSame flat rate, day or night
Guaranteed WorkBacked in writing
Spot the signs

Symptoms we repair — day or night

A water heater rarely fails at a convenient hour. Whatever it's doing, describe it on the call and we'll bring the likely parts:

  • No hot water at all — out pilot, failed element, tripped breaker, or bad gas valve
  • Not enough hot water — a failing element or thermostat, or heavy sediment
  • Water too hot or fluctuating — a miscalibrated or failed thermostat
  • Leaking from a valve, fitting, or — more seriously — the tank itself
  • Rusty or smelly hot water — a corroding tank or spent anode rod
  • Popping, rumbling, or banging — sediment baked onto the tank bottom
  • Pilot won't stay lit — a failing thermocouple or flame sensor
  • Tankless error codes — ignition, scale, venting, or flow-sensor faults

We service every major brand — Rheem, Bradford White, A.O. Smith, Rinnai, Navien, Noritz and more.

Tank leaking right now?

If water is coming from the body of the tank — not just a fitting — act fast:

  1. Shut the cold-water valve on top of the heater (turn clockwise).
  2. Cut the energy: flip the breaker for electric, or set a gas unit's control to "off."
  3. Drain if needed to a floor drain via the bottom spigot to stop spreading.
  4. Call us — a tank leak means replacement, and we carry units to swap the same visit.
Common repairs

What we fix on the spot

Most repairs finish in one visit — our trucks carry the parts that fail most often on Portland's water heaters.

Pilot & Thermocouple

Relight and replace a thermocouple or flame sensor so a gas burner stays lit reliably.

Heating Elements

Test and swap upper or lower electric elements that have burned out or scaled over.

Thermostats

Replace gas control valves and electric thermostats causing no-heat or overheating.

Valves & Fittings

Repair leaking T&P relief valves, drain valves, dip tubes, and supply connections.

Sediment Flush

Flush built-up sediment to quiet rumbling, restore capacity, and extend tank life.

Tankless Service

Descale the heat exchanger and clear ignition, venting, and flow-sensor error codes. Tankless repair

The honest call

Repair or replace? We give you the math

You shouldn't pay to repair a heater that's about to fail anyway — and you shouldn't replace one that has years left over a $180 part. We diagnose first, then lay out the real numbers so you decide with clear information.

Repair usually wins when the unit is under 8–10 years old and the fault is a thermocouple, element, thermostat, or valve. Replacement usually wins when the tank itself is leaking, the heater is past 10–12 years, or the repair approaches the cost of a new unit.

If replacement is the smarter move, we handle that too — see water heater replacement and new installation.

Typical repairRange*
Diagnostic (applied to repair)Quoted upfront
Thermocouple / flame sensor$150–$300
Electric heating element$180–$400
Thermostat / gas control valve$200–$550
T&P or drain valve$150–$350
Tankless descale & service$200–$500

*Typical Portland-metro ranges. Flat-rate quote confirmed before work — no overtime, trip, or after-hours surcharge.

How it works

Hot water back, fast

01

Call 24/7

Tell our dispatcher the symptom and fuel type; we bring the likely parts.

02

Diagnose

The plumber tests the unit and pinpoints the exact failed component.

03

Flat quote

One upfront price to repair — plus the repair-vs-replace numbers if relevant.

04

Repaired

Most repairs done the same visit, tested, and backed by our guarantee.

Water Heater Guide

24-hour water heater repair in Portland, Oregon

Gas water heater being repaired by a Portland plumber Gas · Electric& Tankless

Don't wait for a cold-shower morning

A water heater rarely fails at a convenient hour. A tank leaking from the bottom only gets worse, and "no hot water" before a workday is the kind of problem that shouldn't wait until 8 a.m. A live dispatcher answers around the clock and we keep plumbers on call overnight, so a midnight failure gets a same-night visit at the same flat rate.

Every fuel type, every major brand

We diagnose and repair gas, electric, and tankless units from Rheem, Bradford White, A.O. Smith, Rinnai, Navien, and more — with the parts that fail most often already on the truck.

Common faults we fix the same visit

Most water-heater problems trace back to a handful of parts. Tell us the symptom on the call and we'll bring the likely fix:

  • Out pilot, failed thermocouple, or bad gas valve
  • Burned-out electric heating element or faulty thermostat
  • Leaking T&P relief valve, drain valve, or fitting
  • Sediment causing rumbling, low capacity, or rusty water
  • Tankless error codes — ignition, scale, venting, flow-sensor

Repair or replace?

Repair usually wins for a unit under 8–10 years old with a single fixable fault. If the tank itself is leaking or the heater is past 10–12 years, replacement is the better value — and we'll give you the honest numbers on both before you decide.

Portland's water leaves heavy sediment in tanks, which traps heat, shortens lifespan, and causes that telltale popping sound. Flushing the tank during a repair quiets it and buys back capacity, and we'll tell you honestly when a unit is too far gone to be worth another part.

Every repair is performed by an Oregon-licensed, background-checked plumber and backed by a written workmanship guarantee — whether we relight your pilot at noon or swap a heating element at 2 a.m.

Water Heaters, Answered

More water heater questions in Portland

How long does a water heater last?

A standard tank water heater lasts about 8 to 12 years, while tankless units run 15 to 20 with maintenance. Portland's mineral-rich water shortens tank life by building sediment that bakes onto the bottom, so an annual flush and a fresh anode rod every few years make a real difference. Once a tank passes the 10-year mark, it's wise to plan for replacement before it fails and leaks rather than after.

Why does my hot water run out so fast?

The usual causes are heavy sediment taking up space in the tank, a broken dip tube letting cold water mix at the top, a failed lower heating element on an electric unit, or simply a tank that's undersized for how your household has grown. We diagnose which it is — a flush, an element, or a dip tube is an inexpensive fix, while a chronically undersized tank may be a sizing conversation rather than a repair.

Why is my hot water rusty or smells like rotten eggs?

Rusty hot water usually means corrosion inside the tank or a spent anode rod, and a rotten-egg smell is typically bacteria reacting with the anode. Both are common as heaters age and often fixable — flushing the tank and replacing the anode rod frequently solves it. If the tank itself has corroded through, though, rusty water can be a sign it's near the end and due for replacement; we'll tell you which.

Is a leaking water heater dangerous?

It depends where it's leaking. A drip from a valve or fitting is usually a straightforward repair, but water coming from the body of the tank means it has corroded through and needs replacement — shut off the cold-water supply and call. On a gas unit, also be alert to any gas smell or signs of poor venting, which are safety issues; every gas home should have working carbon monoxide detectors.

What temperature should my water heater be set to?

120°F is the sweet spot for most homes — hot enough to be comfortable and to limit bacteria growth, while reducing scald risk and energy waste. Cranking it higher speeds up sediment and scale buildup (a real concern with Portland's water) and raises your bill. If you're not getting enough hot water at 120°F, the answer is usually a repair or a right-sized unit, not a hotter, harder-working setting.

Licensed Portland plumber servicing a water heater Open24 / 7 / 365
Who We Are

Portland's water-heater team

We're a locally run, Oregon-licensed plumbing company that treats no-hot-water as the urgent problem it is. A real person answers any hour, a licensed plumber is dispatched fast, and the flat rate is the same day or night — no after-hours surcharge.

Stocked trucks and plumbers who know Portland's gas, electric, and tankless systems mean most repairs finish in a single visit.

Licensed
Bonded & Insured
Workmanship guaranteed
Call (971) 399-8934
Service Area

Water-heater service across the metro

We repair and replace water heaters 24/7 across Portland and the surrounding metro. Tell the dispatcher your neighborhood for a real arrival window — usually within about an hour.

Beaverton Vancouver, WA Gresham Hillsboro Lake Oswego Tigard Milwaukie All areas

No hot water tonight?

Don't wait for a cold-shower morning. A licensed Portland plumber can be on the way within the hour — same flat rate at midnight as at noon.

(971) 399-8934Request Service
FAQ

Water heater repair questions

Gas, electric, or tankless — call any hour and we'll talk through what's happening.

Can you repair a water heater at night in Portland?

Yes. A live dispatcher answers 24/7 and we keep plumbers on call overnight. A leaking tank or no hot water before a workday gets a same-night visit, at the same flat rate as a daytime call — no after-hours surcharge.

Why do I have no hot water all of a sudden?

On a gas unit it's usually a pilot that's gone out, a failed thermocouple, or a bad gas valve. On electric it's most often a tripped breaker, a burned-out element, or a faulty thermostat. We diagnose the exact cause and repair it the same visit when parts are on the truck.

Is a leaking water heater an emergency?

A small drip from a valve or fitting can often be repaired. But water from the bottom of the tank means it has corroded through and needs replacement — shut off the cold-water supply and call now, because that leak only grows.

Should I repair or replace my water heater?

Repair usually makes sense for units under 8–10 years old with a fixable fault. If the tank itself is leaking, the unit is past 10–12 years, or repairs approach the cost of a new heater, replacement is the better value. We give you the honest math first.

How much does water heater repair cost in Portland?

Most repairs run about $150–$650 depending on the part — a thermocouple or element is at the low end, a gas valve at the higher end. We diagnose first and quote a flat rate before any work, with no after-hours fees.

Why is my water heater making popping or rumbling noises?

That's sediment built up on the tank bottom, common with Portland's water. It traps heat and pops as it escapes. We flush the tank to quiet it and extend its life, and check whether the buildup has already damaged the tank.

My tankless water heater shows an error code — can you fix it?

Yes. Tankless units throw codes for ignition faults, scale buildup, venting, and flow-sensor problems. We service all major brands, descale the heat exchanger, and repair the fault. See our tankless water heater repair page.

How long does a water heater repair take?

Most common repairs — thermocouple, element, thermostat, or valve — take one to two hours once diagnosed. Our trucks carry the parts that fail most often, so the majority finish in a single visit.

Are you licensed to work on gas water heaters?

Yes — a licensed Oregon plumbing contractor, bonded and insured, experienced with gas, electric, and tankless systems throughout the Portland metro.

Talk to a plumber — (971) 399-8934